Spécialiste
Trans Canada Énergie. Pour tout vos besoins de
piles, batteries, énergie solaire ou éolienne et plus.
Spécialiste
Trans Canada Énergie. Pour tout vos besoins de
piles, batteries, énergie solaire ou éolienne et plus.
Le vrai spécialiste en vente et installation d'énergie alternatives.
Tel: (514) 453- 7999 Email: info@batteriesexpert.ca
Centre de téléchargement / download center
Vente en gros et au détail. Vous trouverez ici toutes les piles et batteries inimaginables.
 |
RV-3012
| SYSTEM OVERVIEW | |
|
System overview:
|
Inverter / charger system for RV
applications with automatic transfer switching between DC and AC modes.
Tested to UL.
|
|
Voltage compatibility:
|
12VDC / 120VAC
|
|
Frequency compatibility:
|
60 Hz
|
| OUTPUT | |
|
Output watt capacity (watts):
|
INVERTER MODE - 3000 watts continuous,
Double Boost™ rated to 6000 watts peak (up to 10 seconds). Overpower™
rating supports overloads to 4500 watts for up to 15 seconds prior to
inverter shutoff. AC / CHARGER MODE - 4800 watts continuous
|
|
Output nominal voltage:
|
AC OUTPUT: 120VAC nominal, DC CHARGER
OUTPUT (DC): 12VDC nominal (see manual for detailed information on
adjustable charger settings for wet/gel battery types)
|
|
Output voltage regulation:
|
LINE POWER (AC): Maintains 120V nominal
sine wave output from line power source. INVERTER POWER (AC): Maintains
PWM sine wave output voltage of 120 VAC (+/-5%).
|
|
Output frequency regulation:
|
60 Hz (+/- 0.3 Hz)
|
|
Outlet quantity / type:
|
Hardwire AC output (2 circuits)
|
|
Overload protection:
|
Includes 30A input breaker dedicated to the
charging system and 2 branch rated 20A output load breakers
|
| INPUT | |
|
Maximum input amps / watts:
|
DC INPUT: Full continuous load - 282A at
12VDC. AC INPUT: 40 amps total (20A line 1 / 20A line 2) at 120VAC with
full inverter and charger load (25A max charger-only from line 1 /
combined input load to support charger and AC output is automatically
controllable to 66%-33%-0% based on AC output loading using the charger
limiting set points - see manual for setting instructions)
|
|
Input connection type:
|
DC INPUT: Set of 4 DC bolt-down terminals
(2 red / 2 black). AC INPUT: hardwire (2 input circuits - see manual)
|
|
Input cord length:
|
DC INPUT: User supplies cabling. 0 gauge or
larger (see manual). AC INPUT: hardwire
|
|
Recommended electrical service:
|
DC INPUT: Requires 12VDC input source
capable of delivering 290A for the required duration (when used at full
continuous capacity - DC requirements increase during OverPower™ and
DoubleBoost™ operation). For automotive applications, professional
hardwire installation with 400A minimum battery system fusing is
recommended. AC INPUT: 120VAC
|
| BATTERY | |
|
DC system voltage:
|
DC input operating range 10-15VDC.
|
|
Battery recharge rate:
|
3 stage, selectable 35/140 amp battery
charger with adjustable settings for wet/gel battery types (see manual for
more charger information)
|
|
Expandable battery runtime:
|
Runtime is expandable with any number of
user supplied wet or gel type batteries
|
| LEDS ALARMS & SWITCHES | |
|
Front panel LEDs:
|
Set of 6 LEDs offer continuous status
information on load percentage (6 levels reported) and battery charge
level (7 levels reported). See manual for sequences.
|
|
Switches:
|
3-position on/off/remote switch enables
simple on/off power control plus auto/remote setting that enables distant
on/off control of the inverter system when used in conjunction with APSRM4
accessory (sold separately) in inverter mode. In AC uninterruptible power
mode, auto/remote setting enables automatic transfer from line power to
battery power, maintaining continuous AC power to connected loads.
|
| SURGE / NOISE SUPPRESSION | |
|
AC surge suppression:
|
450 joules AC surge suppression included
|
| PHYSICAL | |
|
Shipping weight (lbs):
|
67.7
|
|
Shipping weight (kg):
|
30
|
|
Unit weight (lbs):
|
62.6
|
|
Unit weight (kg):
|
28.2
|
|
Unit Dimensions (HWD/in):
|
9.75 x 11.5 x 16.75
|
|
Unit Dimensions (HWD/cm):
|
24.8 x 29.2 x 42.5
|
|
Shipping Dimensions (HWD/in):
|
15.25 x 16 x 24
|
|
Shipping Dimensions (HWD/cm):
|
38.7 x 40.6 x 60.9
|
|
Material of construction:
|
Steel
|
|
Form factors supported:
|
Mounting slots enable permanent placement
of inverter on any horizontal surface (see manual for additional mounting
information)
|
|
Cooling method:
|
Multi-speed fan
|
| ENVIRONMENTAL | |
|
Operating Temperature:
|
32-104 Fahrenheit / 0-40 Celcius
|
|
Relative Humidity:
|
0-95% non-condensing
|
| LINE / BATTERY TRANSFER | |
|
Transfer time from line power to
battery mode:
|
16.6 milliseconds (typical - compatible
with many computers - verify transfer time compatibility of loads for UPS
applications)
|
|
Low voltage transfer to battery power:
|
In AC "auto" mode, inverter/charger
switches to battery mode as line voltage drops to 75V (user adjustable to
85, 95, 105V - see manual)
|
|
High voltage transfer to battery
power:
|
In AC "auto" mode, inverter/charger
switches to battery mode as line voltage increases to 135V (user
adjustable to 145 - see manual)
|
| CERTIFICATIONS | |
|
Certifications:
|
Tested to UL458 (USA) and CSA (Canada)
|
| WARRANTY | |
|
Product warranty:
|
30 months (Outside the U.S. and Canada,
call for warranty information)
|
| SPECIAL FEATURES | |
|
Appearance:
|
Attractive gray color scheme
|
|
Load Sensing:
|
Optional load sense function enables
automatic inverter shutoff and startup as connected equipment is powered
off and on. Front panel load sense potentiometer can be set to shutoff or
turn on inverter power in response to loads of any level, up to 150 watts.
|
| BATTERY PACK ACCESSORY (optional) | |
|
Battery Pack Accessory (optional):
|
98-121 sealed lead acid battery (optional)
|